Worth: $180.00
(as of Aug 05, 2021 17:14:43 UTC – Particulars)
Product Description
Hubsan Skilled Model H501S X4 Professional 5.8G FPV Brushless With 1080P HD Digicam GPS ,Nice for Newbie.
Options:
5.8G FPV Actual-time Video Transmission:
Share the movies and pictures to the LCD show at anytime wherever.GPS Positioning System:
With GPS positioning system, correct positioning location, making the flight extra correct and protected.Comply with Me Mode:
The built-in GPS permits the H501S Professional flying itself to seize your journey wherever you might be.Headless Mode:
No extra want to fret about shedding management of your drone.One Key to Return:
The flight management system will robotically management the quadcopter to show to residence and land.Fail-safe Mode:
The drone will enter into the fail-safe mode when the connection is misplaced from the transmitter. The flight management system will management the quadcopter to return to the house level and land robotically. The fail-safe mode helps to keep away from additional accidents or damages.Exterior Reminiscence:
Help 4 – 32G TF / micro SD card (not included). Product DetailsFrequency: 2.4G&5.8GChannel: 4CHCharging time: About 150minsFlying time: About 18 – 20minsQuadcopter battery: 7.4V 2700mAh Lipo. 105gTransmitter battery: 7.4V1300mAh Lipo ( Included )
Nature show
Motor (x4): Brushless KV1650 PM1806 x4
Package deal record:
1 * drone body1 * H906A Transmitter1 * Battery for Drone1 * Battery for Transmitter8 * Propellers1 * Stability Charger1 * Charger Adapter1 * Assistant Wrench1 * English Guide
Most horizontal flight velocity:20 m/s
Measurement:220x220x70mm
Weight(together with the battery):410g
1080p HD Digicam
Flying it to file the solar to set.
Realizing you are going to see .
and also you coming again residence on the finish.
However you had recorded……
By no means lacking once more.
5.8Ghz antenna emblem faces the drone:Hubsan H906A Transmitter 2.4GHz Connection For H501S H501A H502S H109S normal.
Management distance:400m FPV distance :400m
FLY TIPS
1. Quadcopter and distant management will not be pairing.
(1) Verify that each Quadcopter and distant management are each powered on. (2) Rebind the Quadcopter to its distant management.
2. Can not arm motors.
(1) Just be sure you have accomplished compass calibration. (2) Examine that the Return to Residence change is pointing down/off. (3) Be certain that you’re pulling each sticks down-out. Examine the channels on display screen and confirm that they’re transferring correctly (If they don’t seem to be, please carry out a transmitter stick calibration). (4) In case you are flying indoors, please set the “Fly With No GPS” choice on the Primary Menu from the default “No” to “Sure”.
3. The drone flies erratically in Altitude Maintain mode.
(1) Examine to see if the air strain sensor studying (Altitude telemetry worth) is irregular when the Quadcopter is immobile on flat floor. It ought to learn 0 and fluctuate little or no. (2) Examine to see if the throttle joystick channel is transferring appropriately and correctly centered. If not, please calibrate the transmitter sticks and alter the channel with the corresponding trim button (situated on the transmitter).
4. No video on the display screen or consumer is experiencing sturdy video feed interference.
(1) Rebind the copter to the transmitter, because the 5.8 and a couple of.4 frequencies could be interfering with one another. (2) The video reception is dependent upon the 5.8GHz radio which is delicate to the setting, So you possibly can change the 5.8Ghz frequency of the distant management to enhance this downside.(3)Check Mode: Press the video button and energy on the distant management to enter the check mode, in check mode, you can see the datas of two.4Ghz and 5.8Ghz, if the worth of 5.8Ghz is much less than 56, the 5.8Ghz picture transmission sign is weak, 90~160, the 5.8Ghz picture transmission sign is robust.
5. The SD card cannot file the video or photograph.
(1) Be sure that if the SD card is distinguished. If there’s an exclamation mark, the cardboard does not be distinguished. The cardboard should be changed.(2) Format SD card, the Allocation unit dimension needs to be 32 kilobytes, The Quantity label is clean.
6. The distant management show exhibits “CHECK GYRO SENS”.
On this scenario,because of this the drone is now detecting whether or not the gyroscope is steady. You are able to do as this to unravel this downside:1) Examine if the drone is on a hard and fast degree or on the bottom; 2) If Step 1 cannot resolve, replace the most recent flight management firmware; 3) The above answer can’t resolve it, open the aircraft to examine if the sponge is posted appropriately; 4) If step 3 make it possible for the sponge is posted appropriately, we’ve to vary the flight management board or small strain plate.
HUBSAN X4 H501SS Professional Capabilities:5.8G FPV Actual-time Video Transmission,1080P HD Digicam,Comply with Me Mode,Headless Mode, Altitude mode,Computerized Return,Fail-safe Mode,GPS correct positioning location
